Radius Dish Creator

Generate a spherical radius dish STL or Easel-compatible G-code.

v0.2.2

Project units

Dish length

Dish width

Radius

Material thickness

Center dish depth—

Minimum center thickness—

STL coordinate unitsInches

G-code Toolpath

G-code zero is the lower-left corner of the stock, with Z0 at the top surface. The generated file uses the selected project units.

Path

Carve mode

Ball-nose diameter

Stepover

Max depth / pass

Safe Z

Feed rate (in/min)

Plunge rate (in/min)

Spindle RPM

Final finish passes

Include M3 / M5 spindle commands

STL mesh detail

STL mesh quality

For G-code, use a ball-nose cutter. “Complete carve” makes layered passes limited by Max depth / pass, then runs the final surface path. “Finish only” generates only the final 3D surface path. The .nc export uses only Easel-supported G-code commands. Verify tool settings, zero position, clamps, and machine travel before cutting.

3D Preview Drag to rotate • wheel to zoom

The 3D preview could not load. STL and G-code generation still work.